Final storage of radioactive substances in special UHPC concrete container or strong rooms

One way to encapsulate such substances more

safely and cost-effectively than is currently

practiced is to pour into UHPC Ultra High

Performance Concrete blocks. UHPC has a

large number of advantages over the previous

storage in barrels of different material quality

and pouring into glass.

The advantages of new designs are:

 - UHPC is very easy to process as a casting

    and spraying compound.

 - UHPC has an extremely high pressure

    resistance compared to all standard concretes

 - UHPC is completely waterproof

 - What is poured into UHPC can not corrode

    anymore

 - UHPC is saltwater resistant
 - UHPC also hardens under water

 - UHPC in its high temperature version can

   be used at continuous temperatures up to

   1200°C/ 2192°F. This means that the

   UHPC HT (High Temperature) block is

   stable with internal temperature increase

   as well as with external fire.

   A secure above-ground storage against

   theft is possible because the blocks are heavy,

   large and therefore unwieldy for a quick

   removal. Getting the radioactive material out

   of the block is only possible with extreme

   effort and tools and time.

 - UHPC is based on nanotechnology, the material 

   particles are extremely fine. Almost allother

   particles are surrounded by this glue from

   extremely fine particles. Even with a break of a 

   UHPC block, the foreign matter is firmly trapped

   in the debris.

- It is easy to mix radiation-reducing materials into

   the block

-  UHPC concretes can be very good heat-insulating 

   or very good heat-conducting. It's just a question 

   of the UHPC concrete mixture

The advantages of sealing existing deposits are

• UHPC casting compounds can have a very high                       flowability and easily penetrate into cracks and                          joints and seal them.
• UHPC casting compounds are self-compacting.
• All casting compounds are pumpable and sprayable
• All casting compounds reach more than 70%                            after 48 hours

 

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

 

UHPC Doors and gate constructions

Doors and gates to buildings have been constructed
of wood all over the world for hundreds of years. A
material that was available everywhere. There were
simple doors and gates and there were incredibly
beautiful, filigree doors and gates. There were also
doors and gates that were used exclusively for
military security and where design was absolutely
irrelevant.

Today, doors and gates in architecture are made of
light metal or plastic. In industry and in security
areas, for example, doors and gates must be fireproof,
watertight, burglar-proof, explosion-proof, etc.

The list of requirements is long

Up to now, concrete as a material for doors and gates
was only possible for safe constructions, as concrete
constructions are very heavy.
With UHPC Ultra High Performance Concrete, the
possible uses changed completely.

UHPC material
 - achieves very high strengths
 - can be produced in relatively thin layers

 - is absolutely waterproof
 - is salt water resistant
 - is highly wear-resistant
 - can reach temperatures up to max. Withstand 1200°C
 - can withstand high blast pressures
 - is used in ballistics
 - can be shaped very precisely
 - can be easily combined with wood, metal, minerals and glass
 - is nanotechnology, the finest surface structures can be produced

 - enables the production of very small, fine concrete elements
 - enables large door geometries weighing several tons can be colored easily
 - is processed in a similar way to standard concrete

 

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

UHPC Residential house construction and wooden residential house construction in case of a fire

I see the forest fires on the news and mourn the
destruction of nature and houses. We are
repeatedly asked whether it is not possible to
build fireproof houses with our UHPC.

Concrete and UHPC are non-flammable, so
basically you can say yes we can build fire-proof
houses.
Fireproof houses are not the whole solution to
this problem.

But let's start with the houses.

Most houses are made of wood, making them
a feast for any fire. The houses are set up at a
distance from the ground. In the event of a fire,
the fire is happy to attack from anywhere.
The roofs also often have rear ventilation,
which is like a Christmas present for the fire
and life-threatening for the fire brigade. The
roof still looks good, but underneath it is
burning, whoever goes on such a roof is, in
my opinion, tired of life. Of course you have
large glass surfaces or glass doors to the terrace in the living room, which is of course also made of wood, after all you want to enjoy the wonderful panorama. The fire loves such glass fronts, they are like open barn doors to the fire. The same applies of course to the large entrance area with a wonderful large wooden door.

So there is nothing in this type of house construction that can stop a fire. The photos taken after a fire confirm that there is nothing left.
It is possible to construct a house with UHPC, which keeps fire out for an extremely long time.

Houses can be constructed from precast concrete,
which increases quality, reduces assembly time
and reduces the total cost of a house. Compared
to standard concrete, the prefabricated parts can
be made much thinner. UHPC finished parts can
be removed from the mold very quickly. Due to
the thin UHPC panel construction, the elements
are lighter than those made of standard concrete
and can also be transported and installed more
quickly and easily.

It is also possible to mix thermal insulation into the UHPC material, which significantly reduces
the weight of the material construction. UHPC concrete is permanently heat-resistant up to 842°F.
We also produce high temperature resistant UHPC materials that are permanently temperature resistant up to 2192°F.

UHPC materials are naturally resistant to all types of insects and fungi.

Problem spot: Doors
UHPC can be used to produce doors that are similar in weight to wooden doors but are fire-proof and highly burglar-proof. With UHPC, door manufacturers can meet every design requirement in terms of surface structure, color and construction.

Problem spot: Windows, Glass Fassade
We can only help indirectly here. We are currently working with a window manufacturer to produce window frames from UHPC. Because window frames made of plastic or wood are flammable.
We are also currently developing window protection made of UHPC that closes the window in the event of a fire.

Problem spot: Roof

We can easily make a pitched roof or flat roof
from UHPC. A pitched roof can have any
desired surface design and color.

A wonderful fire protection is a flat roof with
greenery. Because of the soil that is required
for planting and which should always be kept
moist as possible, fire does not have the
slightest chance. The same can be done with facade surfaces. Today designers call it horizontal and vertical gardens. In many large cities, high-rise buildings with a green facade are now being built.

So we can easily provide fire-resistant house structures in the shortest possible time in cooperation with a locally available precast concrete plant and a locally available assembly company. Architects and designers have to take care of the development of the construction and the design.

Should the fire brigade use water, this is no
problem for a UHPC construction. Since water
does not penetrate the UHPC construction, the
interior can be cleaned and re-used quickly and
easily. A complete interior renovation as with
wood and plaster constructions is not necessary.

Annotation:
The best fire protection doesn't help if you build
houses right next to trees. When houses are far
from something flammable like trees, the fire has enormous problems jumping over these areas without fire fodder. That is also the reason why firebreaks are laid in forests when there is a fire. Landscape architects can offer many ideas for this.

 

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

Combination of UHPC and Nanotubes

We are being asked more and more often by
customers in Asia about the use of Nanotubes
in our UHPC products.
It is always the same question, can nanotubes
improve the technical properties of our UHPC
products? 

Our answer to that is:

Yes, Nanotubes with a certain geometry and size
can do that.  

BUT that's like trying to install an additional
carburetor / turbo system in a Bugatti Viron to
get 10% more engine power, with a standard
engine power of over 1000 hp. The Bugatti Viron
is a perfect car system, making it better with a
possible slight increase in performance only rarely
makes sense.

In other words:
A really good UHPC is a perfect, extremely
powerful system, which in today's industry
hardly ever reaches its performance limit.
The UHPC we make is made by creating a
perfect physical packing of specific particles
in order to achieve perfect chemical reactions.

We have been developing and testing the use
of Nanotubes in our UHPC products for more
than two years.
So far, these UHPC special products have only
been used in very special areas of application
that required very special technical solutions
in the areas of mechanics, electrical engineering
and thermal conductivity.
We have been developing and producing UHPC
systems for more than 25 years. We develop
UHPC products for the future. The processing
of Nanotubes and desert sand with our UHPC
products is part of our ideas for the future.

Sustainability and the use of natural materials
such as bamboo or natural fibers is another
development we are taking. The use of sustainable

raw materials in combination with our UHPC
materials, some of which will also be made from
sustainable raw materials in the future, is one of
our goals.

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

UHPC lined hydraulic conveyor pipelines for brine in salt mines

More than 14 years ago, a high-pressure-safe

(loadable up to max. 100 bar / 1450 psi) brine

hydraulic transport pipeline with UHPC wear

protection was installed as a test for other lines.

The pipe installation took place underground. In

addition to the extreme pressure, the line

should be highly wear-resistant and highly

corrosion-resistant.

After all these years, we had the opportunity

to check this line together with the customer

on site.

A pipe element was also removed from the

line and cut open to inspect the UHPC lining.

Neither the customer nor we expected such an

extremely good result after all these years of

operation.

The UHPC lining has only lost a few

millimeters from its 30 mm lining.

Thanks to the seamless, waterproof UHPC

lining, no expensive corrosion protection was

necessary during wear protection assembly.

Which made assembly much faster and less

expensive than the linings previously used.

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

Past and future of concrete in security and military

In the past there have always been interesting

safety solutions with concrete.

Some were successful, some were not. A

success story were bunker structures

underground or above ground for the navy, air

force and army. Even today, concepts for

military and civil security rooms are carried

out with concrete structures.

The next generation in which concrete is

replaced by Ultra High Performance

concrete, or UHPC for short, has been used

very successfully worldwide for a few years.

These UHPC security concepts resist the

strongest attacks, penetration is almost

impossible with the current known weapons.

UHPC security concepts are also increasingly

used in the civil construction industry for

security constructions in safes and security

rooms, coastal protection, fire protection, storm

protection, disaster protection and terrorism

protection.

We are constantly developing UHPC for new

applications, such as floating, unsinkable

platforms that can be used anywhere in the

world, both civil and military.

 

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

UHPC Phalt a semi rigid top layer for all areas of an airport

Our nanotechnology for UHPC binder is now

over 30 years old and has been used in a wide

variety of areas worldwide.

From the beginning, the idea was to create a

material combination that combines the best

material properties of both products in an ideal

and flexible manner.

We call this combination material UHPC-Phalt.

The technique is simply, lay a coarse-grained,

porous, locally produced standard asphalt and fill

the pores with an extremely liquid UHPC concrete.

The result is that a flexible, temperature-resistant, 

high-pressure-resistant and extremely resilient, 

frost and de-icing salt-resistant, long-lasting

runway surface is created.

Benefit:

High axle loads, extreme ambient temperatures,

limited construction time and

constrained budgeting.

Standard laying machines and mixing machines

can be used for processing. Asphalt assembly

companies can easily lay this combination of

such materials

Local asphalt qualities can easily be used for

processing.

Fine sand or desert sand can be used for the

UHPC concrete.

Our UHPC binder can be flexibly adapted to

customer requirements. Curing speeds can be

adapted to customer requirements so that the

laying speeds of the laying machines can be

used to the maximum.

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

Pipeline repair in a potash mine

When I visited a potash mine, I noticed this "cemetery"

of used pipe parts for the hydraulic potash extraction.

There are around 200 pipe parts of different diameters,

lengths, angles and radius. All parts that were specially

manufactured for this production. The pipe parts are all

lined with cast basalt and have a 3-component

anti-corrosion coating. On average, these new pipe parts

cost EUR 700.00 / piece. So there is a value of at least

EUR 140,000.00. Since the pipe parts show more or less

wear damage, all should be disposed of. The disposal

costs amount to at least EUR 12,000.00. The new price

for the pipe is approx. 156,000.00 EUR and the delivery

time is at least 3-4 months.

I explained to the plant management that we can repair

all the pipe parts. We would remove the existing and

partially worn cast basalt lining and replace it with a

new UHPC wear protection lining. I calculated the

budget costs for this at EUR 66,000.00. The repair work

takes approximately 2 months. Here, however, we could

orient ourselves according to the wishes regarding the

installation sequence to the customer and always repair

the pipe parts that he needs at short notice.

Our customer decided on a new lining instead of a new

production and saved 90,000.00 EUR and at least 1-2

months delivery time.

Today there are no more "cemeteries" for used pipeline

parts in his plants.

www.hhbc-consulting.de

info@hhbc-consulting.de

Repair with UHPC wear protection systems

UHPC wear protection material has been used for over 25 years in all industrial sectors worldwide, such
as the cement industry, power plant industry, steel industry and mining industry. A large part of the projects we carry out are repair orders. In recent years, the share of repair orders has risen sharply. Our customers want fast, flexible and cost-effective repairs. A decisive advantage for UHPC wear protection material is the very high protective function against wear and corrosion, the high flexibility in layer thickness and the simple. Assembly. With UHPC wear protection, existing wear protection systems can be quickly repaired. There is no need to order special plates or cylinders with long delivery times. No installation plan is requested.

More and more of our customers order UHPC wear protection in 25 kg paper bags and process the material themselves in order to have the greatest possible flexibility and very short downtimes for the repair.
We define our wear protection material for plants and floor areas. UHPc wear protection material can be processed as mortar, castable and shotcrete.

You need detailed information? Please contact us via: info@wpe-dk.dk

We increase the sustainability of UHPC

With our high-performance UHPC products, we started

using sustainable products years ago. We are also

increasingly focusing on sustainability when it comes

to units for our UHPC binders.

One example is corundum, which we use as an aggregate,

among other things. Corundum can be produced as

synthetic corundum with very high energy consumption

or can be mined as natural corundum in open-cast mining.

We have chosen natural corundum for more than 15 years.

Together with our partner in Africa, we pay attention to a

nature-friendly mining and an equally nature-friendly

restoration of the surface areas. The natural corundum

mined by our partner has proven to be an almost perfect

unit for our UHPC over many hundreds of applications

in the offshore industry, architecture, wear protection

and security industry.

Another problematic aggregate of quartz sand, we can

completely replace today with desert sand, including

from Africa. The technical values ​​of desert sand

concrete are far above the best standard concrete.

In our opinion, it is not necessary to destroy beaches

and rivers by sand mining. The cost of desert sand

mining is many times less than the predatory mining

of river sand or beach sand.

As far as the reinforcement systems or fiber systems

are concerned, nature offers us very sustainable

products that can be used in combination with

high-quality UHPC binder systems to create a perfect

sustainable product.

Our goal is always to produce UHPC binder systems

so flexibly that we can always use a high proportion

of local raw materials.

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

 

UHPC Wear protection lining in a titan ore grinding system

After more than 15 years of grinding operations,

the first repair on the UHPC wear protection lining

are now necessary.

More than 15 years ago, the classifier housing and

the fine material discharge of the vertical roller

grinding system were lined with a UHPC wear

protection lining. The grinding system grinds a

special titanium ore for prigment production.

Originally, very little wear was expected and no

wear protection system was planned. However,

the regrind was extremely wear-resistant and after

a very short time after the vertical roller grinding

system was put into operation, the sheet metal 

construction showed considerable wear.

For fluidic reasons, only a layer thickness of 15 mm

for wear protection could be permitted.  The

UHPC wear protection work was started quickly

and was completed within a few days. The

grinding plant was put back into operation after

six days of inactivity.

WPE DK International

Phone: 0049 176 601 73146
E-mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com

UHPC Wear protection lining in a granulated slag grinding plant

For a granulated slag grinding plant in Germany, 

the channel between the mill and filter was lined 

with UHPC wear protection. The layer thickness 

of 25 mm / 1 inch has so far been standard in all 

of our granulated slag grinding plants lining 

projects.

For around 20 years, areas of cement-, clinker-,

coal- and slag grinding systems have been lined 

with UHPC wear protection material. 

A particular important advantage alongside many 

other UHPC wear protection devices for slag 

grinding plants is the jointless lining.

The assembly effort compared to the assembly of

ceramic plates or special welded metal sheets is the

simple and quick assembly.

WPE DK International

Phone: 0049 176 601 73146
E-mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com

UHPC Wear protection for a KHD Sepmaster cement separator system

Today we lined our 60th KHD SEPMASTER

cement separator with UHPC wear protection. 

For a long time UHPC castable wear protection

concrete was specified and standard for all KHD

SEPMASTER separators.

The first KHD SEPMASTER separators were

lined with UHPC wear protection concrete more 

than 25 years ago. In the current project, the 

associated classifiers and chutes were also lined 

with UHPC wear protection mortar. 

The classifier was cast with UHPC castable wear 

protection concrete. The cyclones and

chutes were lined with a 25 mm / 1 inch UHPC

wear protection mortar layer.

Based on the very long experience we now have,

we expect the lifetime of the UHPC lining is15 years.

WPE DK International

Phone: 0049 176 601 73146
E-mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com