In many prefabricated concrete bridge constructions, the joints between the individual elements are filled
on site with a UHPC joint filler after the concrete elements have been installed. This creates a continuous concrete bridge deck.
Our BF joint filler systems have compressive strengths of 150 MPa - 220 MPa and flexural strengths of 14 MPa - 21 MPa.
The water to cementitious ratio is less than 0,22
Our BF System joint fillers can be processed on site with pan pot mixer, shaft mixer and horizontal mixer.
For very large sites with very large UHPC binder requirements we have mobile production plants for the binder and mobile mixing plants for the UHPC concrete. All plants are housed in containers and are therefore independent of weather conditions. With our mobile production plant for our UHPC joint filler systems, we are able to use local raw materials if suitable.
The joint filler BF systems can be used for all connections between adjacent box beams, next D beams, precast deck panels and beam haunch connections.
There is a wide range of concrete element connections. Each state in the USA and therefore DOT has its own specifications for these.
Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com
