High Performance Concrete product if
you do not have the right mixer to mix
this product perfectly? If possible, a
mixer can handle casting compound,
mortar and Shotcrete mass without it
has an effect on the finished UHPC
product.
There are a lot of different mixer types
in the international market. Some may
mix casting compound, other mortar
compound and yet another Shotcrete
well and few of them can mix the UHPC
products perfectly.
We prefer more than 25 years compulsory
mixers or pan pot mixers called. They
have never disappointed us on all our
international construction sites. They are
very sturdy, at least we use and they are
very easy to handle.
Different mixers can be used for different
requirements and markets.
In general, shaft or pan pot mixers are the
best choice for all applications and markets.
For industrial applications such as Offshore,
For industrial applications such as Offshore,
wear protection, industrial flooring, corrosion
protection, etc., where the highest quality
requirements are set, the best mixers must
also be used, i.e. pan pot or shaft mixer.
Furthermore, our UHPC requires mortar
Furthermore, our UHPC requires mortar
qualities for mixing powerful pan pot or
shaft mixers.
When mixing UHPC Cast, we recommend
using pan pot or shaft mixers. It is also
possible to mix with standard UHPC Cast
material. With smaller quantities of UHPC
Cast it is also possible to use a hand mixer.
We have used a large number of mixers
We have used a large number of mixers
worldwide in our more than 25 years of
assembly work. Most mixers failed because
they are underpowered. It is just a difference
to mix a UHPC or a standard concrete.
For our customers we have put together an
information brochure about mixers, which
you can get from us free of charge in paper
format or as a download.
Laboratory mixing devices can also be used
for small quantities of up to one kilogram of
mixing material or, if the performance is right,
kitchen mixing devices can also be used.
We and our worldwide partners have pan pot
We and our worldwide partners have pan pot
or shaft mixers with different services in our
workshop. You can hire these mixers for
processing on request.
You can also get a list of international mixer
You can also get a list of international mixer
manufacturers with whom we have already
worked.
info@hhbc-consulting.de
