UHPC - Use in recycling plants

UHPC Ultra High Performance Concrete
application in recycling plants for

• Synthetic substance - Recycling
• Plastic - Recycling
• Military equipment - Recycling
• Paper - Recycling
• Metal - Recycling
• Precious metal - Recycling
• PCBs - Recycling
• Nuclear - Recycling

The reprocessing of paper, plastic, chemical 
waste, rubber and metals has become an 
extremely important commodity market for 
the producing industry. Much more metal 
raw material is recovered from reprocessing 
than mining.
The material required for reprocessing is 
stored on large exterior and interior surfaces. 
Here, the bearing surfaces are mechanically 
attacked as well as the corrosive liquids 
extremely.
Many existing concrete surfaces show 
considerable damage, which does not 
guarantee the smooth and safe transport 
of the stored goods for reprocessing.
UHPC floor systems are best suited for 
these loads due to their hardness and 
wear resistance. These floor systems are 
laid without joints. Due to the very high 
material density, penetration of corrosive 
liquid with professional installation is 
almost impossible.

UHPC floor and pavementsystems are 
UHPC Phalt and UHPC TopLayer.

UHPC Phalt is a combination of traditional
asphalt with UHPC concrete. The result is a
ground or street blast with the flexibility of asphalt 
and the very high compressive strength and 
wear resistance of UHPC concrete. The 
processing and processing time is extremely 
easy and cost effective.
UHPC TopLayer are floor coverings made of 
UHPC concrete for very high mechanical loads. 
The material thickness is only a fraction of 
standard screeds or concretes.
UHPC TopLayer are extremely corrosion 
resistant and can be installed almost on any 
flooring. UHPC TopLayer achieve compressive 
strengths of far more than 140 MPa


Applications
- Indoor and outdoor pavements in storage areas
- Roads
- Material bunker
- Chutes
- Pneumatic transport systems
- Scrapyard pavement
- Dedusting systems

Benefits for UHPC Wear Protection
- Flexible layer thickness
- Overhead installation possible
- Jointless installation
- Extreme high compressive strength
- Very high wear resistant
- Very good corrosion resistant
- Adapts each of surface geometry
- Fast curing at ambient temperature

Benefits UHPC Phalt and UHPC Top layer
- Extreme high tensile strength
- Extreme high impact resistance and ductility
- The jointless surface prohibits damages on trucks
- Can be applied thin on even the weakest base
- Freeze/thaw resistance
- Fast curing -short stop time
- Cost efficient alternative where a weak base
  requires a change in both wearing course and
  course



www.hhbc-consulting.de
info@hhbc-consulting.de

Special UHPC materials are virtually the bridge material of the future

Bridges are among the oldest, most important and most prominent construction tasks of humanity. For a long time, bridge construction was mainly characterised by functional criteria, but nowadays more and more attention is paid to visual appearance. Highly developed building technologies can be used to create exciting, previously unimaginable constructions.


Several characteristics of UHPC make it a desirable construction materials. With increased compressive (more than 200 MPa) and tensile 
strengths, the material lends itself well to 
structural applications by allowing higher loads 
to be supported. By utilising the higher strengths, 
traditional structural components can also be 
reduced in size and weigth.
Another benefit of UHPC is the high density and
none porosity of the material making it essentially 
impermeable to water and chlorides, thus making 
the material highly durable. Both characteristics 
also make UHPC attractive in areas of high impact 
and where water or chloride ions can corrode steel 
reinforcement. 

Advantages

• High compressive strength
• Fast development of compressive strength
• High wear and impact resistant
• Absolute frost and thaw resistant
• Impermeable to fluids but still vapour permeable
• Anti corrosive features
• Good bonding to sub-bases, aggregates and reinforcement
• High temperature resistant
• Fast curing
• Sort repair stops
• Jointless lining

Elements of a bridge that can be executed with UHPC

• Bridge foundation 
• Bridge bearings
• Bridge supports
• Bridge deck and bridge deck pavement
• Prestressed concrete foundation 

www.hhbc-consulting.de
info@hhbc-consulting.de