UHPC Rehabilitation of concrete structures


Due to the old age and the increased and
rapidly increasing loads, for example due
to traffic and environmental influences,
an enormous number of concrete structures
are in need of renovation or have to be
completely replaced by new, more robust
structures. The renovation effort in the
infrastructure area is gigantic worldwide.
The focus here is on bridges.

UHPC Ultra High Performance Concrete
materials have many decisive advantages
over standard concretes when renovating
concrete structures. By using UHPC concretes,
material costs, assembly costs and assembly
times can be reduced and the service life of
the repaired concrete structures can be
extremely increased. Standard construction
machines can be used when installing UHPC
concrete.

The goals of repair or repair assembly are in
general

The restoration of stability and a stable concrete 
cross-section
Due to the enormously high strength values ​​of
UHPC compared to standard concrete and its
very fast strength development, the stability of
the construction can be quickly restored.
UHPC mortar, castable and shotcrete materials
can be used.

Increasing the load capacity
UHPC materials offer the structural engineer and
bridge designer the option of significantly
strengthening areas of the bridge structure that are
subject to high loads.

Maintenance or restoration of corrosion protection 
and frost resistance
UHPC is an almost non-porous material that is
absolutely frost and de-icing salt resistant, even
with a very thin layer of material. UHPC is also
absolutely seawater resistant and can also be
processed underwater. Thanks to these properties,
the repair effort for exposed reinforcements is
significantly lower than for standard concrete.
Only half of the material coverage is required
compared to standard concrete

Restoring or increasing the frictional resistance of 
the concrete surface
Through the addition of ceramic or mineral additives
and their very high adhesion to the UHPC material,
any friction coefficient can be guaranteed over a very
long period.

Restoring or increasing the fire resistance of components
UHPC HT (high temperature resistant) materials are
endurance-resistant up to over 1000°C /1832°F. All UHPC
materials are extremely resistant to shock temperature loads.

Increase thermal insulation
UHPC and UHPC HT in combination with extremely
thin high-performance insulating materials can lead to
high-strength and highly insulating structures.

Permanently closing cracks with a static and sealing function
UHPC Castable are based on nanotechnology, they are
extremely thin and penetrate into the smallest pores or
cracks and seal them permanently.

www.hhbc-consulting.de
info@hhbc-consulting.de

No comments:

Post a Comment