UHPC wear protection an example from the steel industry

BF Top Gas Cleaning

UHPC has been specified as a wear protection material in a new dedusting cyclone for a blast furnace by one of the world's largest plant manufacturers in the steel industry. 


We installed the anchors directly at the steel construction company. The UHPC wear protection lining was then lined on site at the steel mill in the installed condition. The total lining area was approximately 1000 sqm. The layer thickness was specified by the plant builder from 25 mm to 40 mm depending on the area in the cyclone. 

          


UHPC Mortar 2000 HT was specified by our customer as the wear protection material. UHPC Mortar 2000 HT is enormously wear resistant even at continuous temperatures up to 1200°C. The cyclone should have a normal average operating temperature of 400 - 500°C. However, it is possible that hot gases up to 1000°C may enter the cyclone uncontrolled from blast furnace.

 

The planned service life is at least 10 years. During these 10 years the blast furnace will not be stopped and therefore repair of the cyclone will be possible only under very difficult conditions. 

 

 WPE DK International

Phone: 0049 176 601 73146
E-mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com




UHPC concrete with rubble or demolition material

Building rubble or demolition material is a very valuable raw material today, its reuse (upcycling), in our opinion, a very important step for sustainability, reduction of raw material requirements, energy reduction in production and reduction of CO2.


Many architects and designers already work in their designs with materials that have become interesting building materials again through upcycling. Old makes new.

 

In Europe there are more and more companies that have specialized in the processing of used building materials. You are preparing demolition material for a new use in your own plant or already on the construction site. The demolition material is sorted and broken according to quality and color.
In conjunction with our HPC or UHPC binder systems, old building materials obtained through demolition are transformed into interesting new building materials with amazing properties.
The sorted and broken waste material is processed with an HPC binder material for later use as an aggregate in a very simple work step. After processing, the demolition material is suitable for processing with HPC or UHPC binder material and water into high-quality concrete, mortar and floor coverings. Plastics, rubber, porcelain and glass can also be processed as aggregates.

With HPC or UHPC casting binder systems, prefabricated elements or bricks can be produced.

New floor coverings can be produced from milled asphalt road surfaces in a few simple operations. This
processing process could be carried out directly on site with the appropriate screening and mixing machines.

 

 WPE DK International

Phone: 0049 176 601 73146
E-mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com

UHPC Verschleißschutz in Müllverbrennungsanlagen

In modernen Müllverbrennungsanlagen werden heute in großen Mengen Hausmüll und Industriemüll zwecks Energie- und Prozessdampfgewinnung verbrannt.

Das Verbrennen von Müll stellt durch die diskontinuierliche Müllqualität erhebliche Anforderungen an die Prozessanlagen und deren Konstruktionsmaterial.

Anforderungen:

  • Glatte Oberflächen

  • Fugenlose Oberflächen

  • Resistent gegen schnelle Temperaturschwankungen

  • Temperaturbeständigkeit bis über 1.000°C

  • Hohe Druckfestigkeit

  • Hohe Verschleißfestigkeit

  • Gute thermische Isolierwirkung

  • Flexible Schichtstärken

  • Gute chemische Beständigkeit

  • Gute Widerstandsfähigkeit gegen

    mechanische Belastungen

 

 


Auskleidungsbereiche:

  • Fahrwege der Müllfahrzeuge bis zum

    Abwurfbereich im Müllbunker
  • Müllbunkerrampen und Wände

  • Müllaufgabebunker

  • Müllförderkanal bis zur Brennerrostaufgabe

  • Asche-/Schlackeförderung

  • Entstaubungssysteme

     
WPE DK International

Phone: 0049 176 601 73146
E-mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com




What about the claim that a UHPC essence, local cement and local sand can be used to produce UHPC concrete?

Again and again we read in flyers from UHPC manufacturers that they have a UHPC essence with
which the customer can easily mix a local cement and local sand with this UHPC essence and water and then the customer gets a UHPC concrete. As a rule, this text is very general and does not go into technical details, which has its reasons.


Let's start with the statement:
...locally available cement and sand can be used....


In itself, this statement is not wrong, if we disregard what the customer expects from the quality.
Why?
Well, if we buy a C25 cement, it is impossible to produce a C100 UHPC concrete with a UHPC essence.
If we want to produce a high quality UHPC concrete we need high quality cement, this cannot be changed.
Many users believe that cement from manufacturer A is exactly the same as from manufacturer B if only it says C35.
This is also partly a misconception. Yes, it is true that with both you will get a strength of 35 MPa. But if you look at the anlaysis of the two cements, they could be very different. However, these differences determine the suitability for a UHPC and how it can be processed.
The same applies to aggregates such as sand. Of course I can add local sand but a high quality binder will only be a high quality UHPC if the right sand with the right grading curve is added, otherwise there is a possibility that you will only get a good concrete.


You can of course test the local sand and cement for suitability. Such a test takes one day if the analysis data of the cement and sand are available. We do this cost free for our customers.

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com




Who invented the UHPC Binder?

Again and again we are asked who invented the UHPC binder. Very often the French and the Germans are associated with it, but all these countries and their companies did not invent it. It was the Danes and everyone else copied the Danes. Why we want to know this so exactly. Well, our whole team worked for this Danish company. We have a timeline here of how it all came about.  We at hhbc-consulting and WPE DK have been working with UHPC for almost thirty years. Who can have such experience.




WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

UHPC Gravity Platforms


The construction of gravity platforms is not a new technology. There are already several concrete gravity
platforms in use nearshore. They are designed and manufactured like a barge. Oil and gas processing plants including storage facilities are installed on them.

Compared to standard concrete platforms, gravity platforms made of UHPC concrete are more durable,
much more resistant and almost maintenance-free.
UHPC offshore structures have been around for over 20 years. UHPC Offshore concretes are absolut salt water resistant. In the meantime, UHPC offshore structures are beginning to replace the outdated offshore steel structures. Offshore steel structures are also stabilised with UHPC concrete or the statics of the structure are improved. UHPC structures are also very resistant to ice floes.



Thanks to mobile production facilities, all our UHPC materials can be manufactured and processed on site. There is definitely the possibility to use local raw materials in the local binder production.





WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

Sales of Mobile HPC and UHPC Production Systems + Production licences

Mobile HPC and UHPC Production System
We will start selling our mobile UHPC production system at the beginning of July this year. 

The technical documentation required for this can be requested from this date via uhpc.production@hhbc-consulting.de. The base production system consists of two 40" containers. The whole mobile production system is modular and can easily be enlarged. Through planned modifications the modules can be used in both high and low temperature environments. The UHPC binder production modules can be extended by a UHPC concrete mixing module. The UHPC basic concrete mixing module will include a powerful concrete pump. In this basis module you can mix HPC and UHPC mortar, castable, Shotcrete, and TopLayer. The basic modules can be easily adapted to the customer's requirements.


HPC and UHPC production licences

We sell production licences for all our HPC and UHPC binder systems.

We also sell production licences for the HPC and UHPC binder systems that we develop with local raw materials at the request of the customer.
Interested parties can contact us at any time by phone 0049 176 601 73146 or uhpc.production@hhbc-consulting.de. 

 

 WPE DK International

Telefon: 0049 176 601 73146
E-Mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com



Comparison HPC/UHPC - Standard concrete according DIN EN 206-1

This is a small excerpt from our HPC - UHPC manual book 2020. it shows a small technical section of our possibilities.
Our HPC - UHPC manual book 2020 is currently being revised and will then be available to our customers.

 

 

 WPE DK International

Phone: 0049 176 601 73146
E-mail: ber@wpe-dk.dk
Homepage: www.wpe-dk.com

 

 

 


 

New UHPC concrete laboratory for us in Germany

Since the beginning of this year, we have put our UHPC concrete laboratory No.2 into operation. In our
UHPC concrete laboratory No.1, we continue to concentrate on the quality monitoring of our raw materials and UHPC end products. Due to the constantly high production volume and the resulting high level of monitoring, it was time for a second laboratory.


Our UHPC concrete laboratory No.2 is located near Flensburg in northern Germany.

 

 The tasks for the new laboratory No.2
- Development of new HPC and UHPC binder systems for WPE International
- Development of new HPC and UHPC binder systems on behalf of our international customers.
- Improvements of our standard HPC and UHPC binder systems
- Reduction of the cement content in our HPC and UHPC mixing recipes
- Testing of new aggregates and biomaterials
- Development of UHPC material for security and military applications
- New grouting material for the offshore industry
- Development of new very light HPC and UHPC binder systems
- Development of production processes for HPC and UHPC production in different countries
- Testing of new raw materials for our binder system.

The UHPC laboratory will grow in the future just like its tasks.
There are initial plans from WPE DK International for a small, very flexible production of all HPC and UHPC materials at the same location as Lab No.2. 


WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

 




Local UHPC offshore binder production through our new UHPC binder production modules.

 


We have been supplying UHPC grouting material to the offshore industry worldwide for many years. Our UHPC offshore programme consists of UHPC binder systems for wind turbines, offshore foundations, offshore repair material for oil and gas platforms, offshore corrosion protection and UHPC Oilwell cements.
With the new mobile HPC and UHPC binder production plants, we are able to produce HPC and UHPC binders locally with local raw materials worldwide after prior suitability testing. The mobile plants are modular in design and can be easily expanded.

 

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

 

 

New mobile production plant for HPC and UHPC binder systems

In addition to our stationary production plant, we are planning to put a mobile HPC and UHPC production
plant for the production of HPC or UHPC binders into operation from the beginning of July. The production plant is housed in three 40" containers and is intended as an expandable modular system. In its basic configuration, the module will produce 120 t / day of binder material. A single packaging unit is integrated into the container for packaging in 1 to BigBag or in 25 kg paper bags. We also plan to commission a mobile HPC and UHPC mixing line one month later. For the basic equipment, a 40" container is required.
The mixing plant can produce approx. 60 t / day of HPC or UHPC ready-mixed concrete. In the basic version, the raw materials are processed "just in time" into binder or HPC / UHPC concrete. In case of a larger daily demand, the raw materials are stored in silos to supply the production modules with raw material


The production and mixing modules can then be used on any construction site in the world.
We will also sell these module systems. They will then be customised to the needs of the customer.
For local HPC or UHPC production, we also offer licences for our HPC and UHPC mixing recipes to our customers.

 

 

 

 

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com

 

 

New Generation low price HPC and UHPC Binder systems

 

For more than 25 years, we have been involved in the development, production and processing of HPC
and UHPC binder systems. Since then, we have always worked with the same reliable raw material suppliers. This long-standing cooperation guarantees quality, reliability and available.

This has enabled us to keep our HPC and UHPC binder prices unchanged since 2020. Our new UHPC concrete laboratory, which has been active since the beginning of this year, has revised some HPC and UHPC binder systems and these new versions particularly concern the qualities C80 to C140 as fibre-reinforced mortar, castable and shotcrete. We will be able to offer these qualities at a reduced price from June this year.

Would you like to know more about our HPC or UHPC binder systems or just a price for your current project? 

 

 

 

 

WPE DK International

Phone: 0049 176 601 73146
E-mail: info@wpe-dk.dk
Homepage: www.wpe-dk.com