Showing posts with label marinestructures. Show all posts
Showing posts with label marinestructures. Show all posts

Repair and new construction of concrete structures at coastal areas with UHPC

The splash zone is without doubt one of the more 
aggressive environment for wood, concrete and/or 
steel. Here you have the movement of the water 
inducing wear on the structures, high level of 
oxygen inducing a perfect corrosive environment. 
In salt water chlorides are present all over but 
combined with good access of oxygen this zone is 
where the problem is.
 In icy regions ice sliding by 
a structure will tear and wear the structure. 
UHPC Ultra High Performance Concrete is here 
an ideal construction material or protection layer.

Sea level rise
It is likely to lead to greater flooding, 
salinisation and erosion in coastal areas, 
affecting millions of people worldwide and 
costing billions of dollars of damage.
Today, a lot of big cities are right on the 
coast or at estuaries. Changes in sea level 
or in severe storms or torrential floods 
directly hit these cities. Most cities have
not yet realized this danger and have not 
yet taken any protective measures. Such 
safeguards include raising defenses, 
implementing flood storage and construction 
of new river barrier systems.

Many important industries are located 
particularly in Asia directly on the coast. 
Without future active coastal protection, 
this industry will be a major problem for the 
respective country.

Prefabricated concrete elements made of 
special UHPC concrete are ideal for effective, 
long-lasting coastal protection.
The elements can be made slim and light due 

to the enormous strength. They are easy to 
transport and assemble. They are extremely 
corrosion resistant and virtually repair-free. 
The expected lifetime far exceeds that of 
standard concrete elements.

Areas of application are

  • Marine structures
  • Coastal protection
  • Quay construction
  • Weir, dock and wharf construction
  • Jetty construction
In many coastal industries seawater is used for 
process cooling. In steel or concrete pipes, the 
water is pumped directly from the sea into the 
corresponding production.

To ensure the necessary process cooling 
permanently, it is extremely important that the 
water supply is always constant. A reduction 
by the flow rate, for example, a reduction in the 
conveying cross section of the pipeline can 
result in the worst case to a stop in the production 
or cause damage to the system due to overheating.

In most cases, standard concrete qualities is used 
in the manufacture of concrete pipes.
These tubes have a rough and porous surface. 
Shells of all kinds can be very firmly and 
permanently anchor on the basis of porosity in the 
concrete structure. Especially pipes in cooling 
water or cooling water channels must regularly 
notify the mussel case be removed.

In the removal the firmly anchored mussel beds a 
part of the concrete surface is also always removed, 
which can cause the concrete reinforcement may 
corrode. The result is a time consuming and costly 
repairs to the existing concrete structure.

UHPC concrete has a compared to standard concrete 
extremely low porosity and a very high wear resistance. 
These characteristics make it is not possible to 
permanently anchor the shells in concrete. Removal of 
the mussel beds is quick and does not damage the 
concrete surface.

Standard concretes can effectively protected with a 
10 - 20 mm UHPC layer for a very long time.


www.hhbc-consulting.de
info@hhbc-consulting.de